Residual Brake Pressure Valve for 4-Wheel Disc Applications

When running 4-wheel disc brakes, you'll need to install this 2 psi residual pressure valve to ensure proper braking.  It's a super easy installation:  Just screw the tubing into the port where your master cylinder normally feeds the rear brakes.  Install the valve on the tube.  Then install your original brake line into the valve.  You can hand-bend a loop in the tube to make it even easier.  Make sure when running 4-wheel discs, you use the proper larger diameter master cylinder.   This part is not needed when running front disc brakes only.

Residual Brake Pressure Valve for 4-Wheel Disc Applications
Click To Enlarge
  • Item #: 17-2935
  * Marked fields are required.
Qty*
Price $22.95