Sachs Complete Clutch Kit, Type 1 Engine- '70 & earlier 200mm Throwout Bearing Guide Sleeve, '71 & Later T1, 2, 3
Sachs Complete Clutch Kit, Type 1 Engine- '70 & earlier 200mmThrowout Bearing Guide Sleeve, '71 & Later T1, 2, 3

From bone-stock, up to about 100HP, this clutch combination is about the best there is. It will be the longest lasting, softest and smoothest operating, and best performing clutch we can recommend. We've even drag raced these clutches on small...

This is the sleeve the the throwout bearing slides on inside the bell housing of '71 & later air-cooled VW's

$139.95

$8.95

Sachs Complete Clutch Kit, Type 1 Engine- '71 and up Kennedy 1700 Lb. Stage One Pressure Plate
Sachs Complete Clutch Kit, Type 1 Engine- '71 and upKennedy 1700 Lb. Stage One Pressure Plate

From bone-stock, up to about 100HP, this clutch combination is about the best there is. It will be the longest lasting, softest and smoothest operating, and best performing clutch we can recommend. We've even drag raced these clutches on small...

This is a time-tested and proven pressure plate, the ultimate for high performance applications. The stock VW pressure plate is designed to handle up to 134 ft-lbs. of torque, wheras the Stage 1 Kennedy handles up to 180 ft-lbs with its 1700 lb....

$129.95

$161.95

Kennedy 2100 Lb. Stage Two Pressure Plate Kennedy 2600 Lb. Stage Three Pressure Plate
Kennedy 2100 Lb. Stage Two Pressure PlateKennedy 2600 Lb. Stage Three Pressure Plate

This is a time-tested and proven pressure plate, the ultimate for high performance applications.  Stage 2 KEP pressure plates have 2100 lb of clamping force, for higher horsepower applications, such as racing and/or off-roading.

 

This is a time-tested and proven pressure plate, the ultimate for high performance applications.  Stage 3 KEP pressure plates have 2600 lb of clamping force, for higher horsepower applications, such as racing and/or off-roading.

 

$161.95

$161.95

Heavy Duty Exedy "Daiken Disc" Clutch Disk- 200mm EMPI 1700 lb. Heavy Duty Pressure Plate
Heavy Duty Exedy "Daiken Disc" Clutch Disk- 200mmEMPI 1700 lb. Heavy Duty Pressure Plate

The "Daiken Disc" clutch disc, made by Exide, is widely considered the best heavy duty clutch disc for your stock or performance VW. It is not "grabby", but provides smooth operation and will take a lot of heat and abuse. It can be coupled with...

This 200mm pressure plate is a perfect less expensive alternative for off-road, street, or strip. It is balanced, and has a removable center ring, so it can be used on early or late transmissions with a 200mm flywheel. We've had great luck with...

$44.95

$98.95

"Kush Lock" Heavy Duty Clutch Disc SACHS Throwout Bearing, Late ('71 and later)
"Kush Lock" Heavy Duty Clutch DiscSACHS Throwout Bearing, Late ('71 and later)
This EMPI heavy duty clutch disc really puts power to the ground. It's one of our favorites for many applications. Whether it's for street, strip, or off-road, we prefer this disc for all-around use, smoothness, comfort, and power. Steel riveted hub and triple sandwich center for smooth action.

Sachs premium quality throwout bearing is widely recognized as the absolute best available on the market.

$43.95

$29.95

SACHS Throwout Bearing, Early ('70 and earlier) "Super Clips" for Early Throwout Bearings ('70 and earlier), pr
SACHS Throwout Bearing, Early ('70 and earlier)"Super Clips" for Early Throwout Bearings ('70 and earlier), pr

Sachs premium quality throwout bearing is widely recognized as the absolute best available on the market. They come with mounting clips, but we recommend using "Super Clips" as an extra measure of safety when installing.

Back in the "early days", VW enthusiasts found that the stock clips that hold the throwout bearing were prone to failure. This clip is a redesign of the original retainer, with more pressure holding the clip in place. It's a very inexpensive...

$38.95

$4.95