Norris Performance Camshaft, Grind #336S - Type 1 Engines

Norris has been making performance VW cams since the early 60's, and are pioneers since the very early days of VW racing.  To this day, they make some of the very best cams around, matching them to almost any VW engine configuration. We're proud to carry a full selection of these cams in stock, and can special order even more for specific racing applications.  From bone stock, to all out drag racing, we have a Norris cam that matches your exact needs.

All Norris cams are manufactured from the highest quality proferal billets, and will work with 40HP engines, single port 1600 or dual port 1600 based builds.  All Norris cams require the early "flat" style cam gear.  Each cam comes with the three correct bolts to secure it to the gear.  We have several different cam gears available as an option that match these cams well  The USA-made aluminum cam gears work fine on most any application, except engines that are equipped with dual valve springs and revved higher than 6000 RPM's.  For the more mild applications, EMPI cam gears will work fine, too.  If you want the utmost in performance, steel straight-cut cam gears work excellent on any engine and any RPM range.  Since they are straight cut, they will eliminate the thrust load on the cam bearings, freeing up some power and minimizing wear.  Straight-cuts do make a very distinctive "whine" sound, which some people really like, and others don't.

Norris no longer makes lifters, we recommend using quality Scat lifters, as these have proven to match these cams very well.  We have two different lifters that we use to match them.  The standard lifters work great for most any application.  The lightweight 75-gram lifters also come with an oiling hole in the center that lubricated the camshaft.  For racing applications, using a lightweight valve train and this extra oiling will help keep things working well together, particularly at higher RPM's.

Lobe centers are all ground at 107 degrees for maximum power in the low RPM range, all the way up to whichever power band you choose the cam to match.

Full technical info available at NorrisCams.com

#336S - THE "STREET/STRIP" PERFORMANCE CAM - This cam is a great choice for lightweight cars that want to go fast.  It will work in a variety of applications for a big punch.  We especially like this cam in medium displacement motors (1835cc - 2054cc).  We've run it on our 1968cc and it ran mid 13's in the 1/4 mile at 95 MPH.  It purrs like a kitten, yet roars like a lion!  Like its little brother, it can be used with 1.1:1, 1.25:1, or 1.4:1 ratio rockers.  It works best with engines with performance modifications such as ported heads, counterweighted crank, etc.  With the right combo, it can make power up to 7200 RPM's.  It's nice and smooth around the street, yet really packs a punch at the track.  We've used this cam to win drag races, and yet drove the car 400 miles home after we were done.  Idle speed needs to be set a little higher than stock.  

ADV DURATION -- DURATION AT .050" -- CAM LIFT -- VALVE LIFT 1.1 -- VALVE LIFT 1.25 -- VALVE LIFT 1.4
290 degrees -- 252 degrees -- .330 -- .363 -- .413 -- .462

Norris Performance Camshaft, Grind #336S - Type 1 Engines
Click To Enlarge
  • Item #: 336S
  * Marked fields are required.
Qty*
Price $89.95