|"Old School" Style Chrome/Stainless Air Cleaner Kit||#10 Hose Clamp - Stainless MADE IN USA|
These vintage style air cleaners come in a variety of different styles. This particular one is our Chrome and Stainless version. It comes with chrome lids, treated metal bases, and powder-coated stainless steel look cages. The air cleaner set is...
Fits oil breather hoses at valve covers, air cleaners, and breather tube
|#6 Hose Clamp - Stainless MADE IN USA||Adjustable Fuel Pressure Regulator w/Bracke|
Fits 5/16" to 1/2" fuel hose. Mostly used for balance tubes between carburetors.
|Fuel pressure regulator is adjustable from 1 to 5 psi. We have this same regulator on our dyno and in our daily driven cars. it works great! We have tested this model extensively and found it provides 2 psi when the dial is set to two. We...|
|Cloth Braided Fuel Hose, 5mm, Sold per foot||DELUXE Kadron Velocity Stack Screen Filters|
Smart VW owners use cloth braided fuel lines in their engine bay and under their fuel tank as VW designed.
These special two-stage filters are specifically designed to fit perfectly onto our velocity stacks and provide great airflow for maximum horsepower, give a great custom look, and provide adequate filtration for your race or street/strip motor.
|Facet Electric Fuel Pump with Fittings||Kaddie Shack Racing 5/16" Stainless Steel Hard Fuel Line Kit|
|This is a top-quality electric fuel pump. We use them in our own personal cars to get all of the fuel lines out of the engine bay, and away from any heat or fire. We recommend installing this item as close to the fuel tank as possible, and away...|
This kit features 5/16" stainless steel fuel tubing and stainless steel fittings to remove all rubber fuel hose from your engine bay, as required for safety by virtually all sanctioned race organizations. The larger diameter fuel lines will not...
|Kadron Accelerator Pump Drive Rod Replacement||Low Profile (Ghia, Buggy, & Early Bug) Intake Manifolds|
FINALLY! We have replacement accelerator pump drive rods available for Kadron carburetors. It is common to find carburetors with this rod broken, and until now there was nothing that could be done to fix this problem, short of machining a new rod...
Here's a perfect solution to a high quality intake manifold system that is lower profile than the standard Kadron or aftermarket manifold. This is over 1" shorter, allowing ample clearance in tight spots such as in Ghias, oval window bugs, or...
|Original Restored Treuhaft Intake Manifolds, Pair||Pertronix IGNITOR 2 Electronic Ignition For SVDA Distributors|
Original Restored Treuhaft Intake Manifolds, Pair
PERTRONIX Electronic Ignition For SVDA Disrtributors
|Type 2/4 Intake Manifold Kit||Velocity Stacks for Kadron/Solex H40/44EIS (pair), with hardware|
Type 2/4 Intake Manifold Kit. Use with 40mm and 44mm Kaddies. Comes complete with all necessary hardware and gaskets.
We've made up to 17 more horsepower with these stacks over running no air cleaners at all!Velocity stacks help any Kad-Powered engine breathe better. Breathing better equals more horsepower. More horses equals more fun. See article and test...
|Adjustable Fuel Pressure Regulator Kit||PERTRONIX IGNITOR Electronic Ignition For 009 Distributors|
Our Adjustable Fuel Pressure Regulator Kit is "Turn Key", just like our carbs. It comes with an adjustable regulator, a mounting bracket, two brass 1/4" inlet fittings, four USA-made stainless steel hose clamps, and two feet of USA-made fuel hose.
PERTRONIX Electronic Ignition For 009 Disrtributors
|PERTRONIX IGNITOR Electronic Ignition For SVDA Distributors||Aluminum Kadron Compatible Intake Manifolds EMPI "Generation 3"|
PERTRONIX Electronic Ignition For SVDA Disrtributors
|EMPI "Gen 3" intake manifolds for Kadron carburetors are the best that have ever been made, in our opinion. The thick casting, proper port design, and heavy casting make them ideal for high performance applications, as well as stock ones. This...|
|1/4" Fuel Line - MADE IN USA||3/8" Fuel Line - MADE IN USA, used for balance tube|
1/4" Fuel Line - MADE IN USA
3/8" Fuel Line - MADE IN USA
|5/16" Fuel Line - MADE IN USA, used for balance tube||5/32"vacuum hose. MADE IN USA|
5/16" Fuel Line - MADE IN USA
5/32"vacuum hose. MADE IN USA
|Brass Fuel Tee - 1/4"||Conical Style Air Cleaners for Kadrons, Pair|
Brass Fuel Tee - 1/4"
Another Kaddie Shack Exclusive: These conical style air cleaners are pre-drilled to use the stock air cleaner bracket to retain your air cleaner. With most conical filters, they are only secured by the tiny lip on the bottom of the air cleaner,...
|#4 Hose Clamp - Stainless MADE IN USA||"Early" Vintage Kadron Air Cleaners|
Fits fuel lines and up to 5/16" balance tubes.
Restored vintage Kadron air cleaners give that perfect "Old School" look to any project.
|Custom Jetting for Kadron Solex H40/44EIS Carburetors||High Performance Kadron Venturis - sold per pair|
We can supply you with the exact size jets you need to match your engine, altitude, and driving habits! We have spent hundreds and hundreds of hours testing and perfecting our Kadron jetting to make sure you get the correct size you need on the...
These venturis are machined to match every engine combo.
|EZ Idle Mixture Thumbscrew $19.95 for 1, $34.95 for 2||Fuel Pressure Reduction: Pump Gasket Shim Kit|
These make life MUCH easier on some cars.
Used to lower fuel pump pressure during installation
|Hi-Flo™ Horsepower Enhancement Kit For Dual Kadrons||Kadron Solex H40/44EIS Idle Jet - Specify Size|
This kit replaces the stock air cleaner mounting bracket with an improved model for less restriction and better breathing. We've seen gains as much as 8 horsepower during dyno testing for Hot VW's Magazine and have been thoroughtly impressed ever...
|One idle jet replacement for your Kadron Solex H40/44EIS carburtetor. Sorry, but we do not give out or suggested jetting sizes for your particular application, but you can order our suggested jetting... See JET-1 These idle jets are sold each. You'll need two.|
|Kadron Solex H40/44EIS Main Jet - Specify Size||Kadron Reproduction Sticker|
|One main jet replacement for your Kadron Solex H40/44EIS carburtetor. Sorry, but we do not give out or suggested jetting sizes for your particular application, but you can order our suggested jetting... See JET-1 These idle jets are sold each. You'll need two. Sold each. You'll need two.|
Use this to spruce up your new or old linkage.
|Original Kadron Fuel Rails||Refurbished Aluminum Low Profile Manifolds, Ghia Preferred|
To complete that vintage "Old School" look, add these restored fuel rails to your original style linkage.
Great for Ghias. Good also for any application where an aluminum manifold is recommended.
|Refurbished Aluminum Standard Profile Intake Manifolds||Kaddie Shack Re-bushed Throttle Bodies: Pair|
Good for any application where an aluminum manifold is recommended.
Tired of those old, worn-out, sloppy throttle bodies? Kaddie Shack exclusive rebuilt and re-bushed throttle bodies are better than new... much better, actually. Even new throttle bodies are notoriously sloppy, causing vacuum leaks and unsteady...
|New Chrome Kadron Air Cleaner Assemblies||Off-Road Prefilter|
Quality washable new air cleaners with all mounting hardware.
For filtering dust and dirt in Off-Road situations, these pre-filters woill help your air cleaners last much longer. Sold each, so you need two.
|Original Steel Dual Port Intake Manifolds, Refurbished||Early Style Air Cleaner Element for Kadron H40/44EIS Carbs|
These are inspected for leaks, stripped, and powder-coated. The mounting surfaces are smoothed. They are available in black. The steel manifolds are for vintage look only, and should not be considered a performance product. NOTE: They do not...
This high quality filter is reusable and will last for years. Keep it oiled with air filter oil. This filter replaces the original paper elements that came inside the early "can" filter housings. Sold each.
|"Dual Cam" Heim joint Linkage for Kadrons - Made in USA||HI-FLO™ Off-Road Rough Terrain & HP Enhancement Kit for Kadrons|
This is the very best of linkages that we've found to work with Kadrons. This is installed on over 90% of our "Turn-Key" kits we build for customers, and the one that we choose to run on all of our personal cars. The heim joint design eliminates...
This Off-Road Terrain kit is like our standard kit, but is designed for abuse! Dyno and dirt tested: This kit is a winner. It will improve horsepower and help eliminate float bowl overflow. During fast take-offs, hard cornering, bouncing around...
|Single Port Kadron Intake Manifolds, (1 piece)||Single Port Kadron Intake Manifolds, (2 piece)|
Single Port Kadron Intake Manifolds, (1 piece): These very rare manifolds have been checked, stripped, cleaned, honed, and re-painted. They are no longer manufactured, so they're getting harder and harder to find. These are UNCUT steel manifolds....
Single Port Kadron Intake Manifolds, (2 piece)
|Single Port Kadron Intake Manifolds, Aluminum|
These are super rare and highly sought after!