Kaddie Shack Racing 5/16" Stainless Steel Hard Fuel Line Kit Billet Fuel Plump Block-Off Plate, Kaddie Shack
Kaddie Shack Racing 5/16" Stainless Steel Hard Fuel Line KitBillet Fuel Plump Block-Off Plate, Kaddie Shack

This kit features 5/16" stainless steel fuel tubing and stainless steel fittings to remove all rubber fuel hose from your engine bay, as required for safety by virtually all sanctioned race organizations. The larger diameter fuel lines will not...

Quality MADE IN USA billet fuel pump block-off plate, laser-engraved with the Kaddie Shack logo. Comes with stainless steel allen head mounting bolts. Allows you to block off the current fuel pump area on the engine case so you can run an electric pump. Fully anodized for years of good looks.

$179.95

$19.95

Facet Electric Fuel Pump with Fittings Adjustable Fuel Pressure Regulator w/Bracke
Facet Electric Fuel Pump with FittingsAdjustable Fuel Pressure Regulator w/Bracke
This is a top-quality electric fuel pump. We use them in our own personal cars to get all of the fuel lines out of the engine bay, and away from any heat or fire. We recommend installing this item as close to the fuel tank as possible, and away...Fuel pressure regulator is adjustable from 1 to 5 psi. We have this same regulator on our dyno and in our daily driven cars. it works great! We have tested this model extensively and found it provides 2 psi when the dial is set to two. We...

$49.95

$29.95

Adjustable Fuel Pressure Regulator Kit Fuel Pump, Alternator Style, For 100mm (short) drive rod, Brazil
Adjustable Fuel Pressure Regulator KitFuel Pump, Alternator Style, For 100mm (short) drive rod, Brazil

Our Adjustable Fuel Pressure Regulator Kit is "Turn Key", just like our carbs.  It comes with an adjustable regulator, a mounting bracket, two brass 1/4" inlet fittings, four USA-made stainless steel hose clamps, and two feet of USA-made fuel hose.

Fuel pump replacement is really easy. However, there are two pumps available and they're not interchangeable. Over the years, who knows what's been installed in your car. The late pumps were installed on '74 and later bugs (referred to as...

$44.95

$34.95

Fuel Pump, Generator Style, For 108mm (long) drive rod, Brazil Fuel Pump, Generator Style, For 108mm (long) drive rod, EMPI
Fuel Pump, Generator Style, For 108mm (long) drive rod, BrazilFuel Pump, Generator Style, For 108mm (long) drive rod, EMPI

Fuel pump replacement is really easy. However, there are two pumps available and they're not interchangeable. Over the years, who knows what's been installed in your car. The late pumps were installed on '74 and later bugs (referred to as...

Fuel pump replacement is really easy. However, there are two pumps available and they're not interchangeable. Over the years, who knows what's been installed in your car. The late pumps were installed on '74 and later bugs (referred to as...

$34.95

$19.95

Fuel Pump, Alternator Style, For 100mm (short) drive rod, EMPI CHROME Fuel Pump, Generator Style, For 108mm (long rod), EMPI
Fuel Pump, Alternator Style, For 100mm (short) drive rod, EMPICHROME Fuel Pump, Generator Style, For 108mm (long rod), EMPI
Fuel pump replacement is really easy. However, there are two pumps available and they're not interchangeable. Over the years, who knows what's been installed in your car. The late pumps were installed on '74 and later bugs (referred to as...

Fuel pump replacement is really easy. However, there are two pumps available and they're not interchangeable. Over the years, who knows what's been installed in your car. The late pumps were installed on '74 and later bugs (referred to as...

$21.95

$27.95

Fuel Pump Drive Rod, 100mm, Alternator (late) style Fuel Pump Drive Rod, 108mm, Generator (early) style
Fuel Pump Drive Rod, 100mm, Alternator (late) styleFuel Pump Drive Rod, 108mm, Generator (early) style

Replacement fuel pump drive rod.  Use correct length to match pump.

Replacement fuel pump drive rod.  Use correct length to match pump.

$3.95

$3.95

Dual Port Kit - Red Metal Fuel Line To Fuel Pump
Dual Port Kit - Red Metal Fuel Line To Fuel Pump

These boots replace your old cracked intake boots. this fits between dual port end castings and the center section. Includes dual port intake gaskets. Black boots are available. 

This important part is often missing on VW engines.  It connects the soft line under the car to the fuel pump, routed through the firewall tin.  

$8.95

$4.95

Fuel Pump Insulator Stand Fuel Pump Gasket, Lower
Fuel Pump Insulator StandFuel Pump Gasket, Lower

A cracked insulator is common.  Replace yours with this quality replacement part. Don't forget to grease your pump.

Extra thick fuel pump gasket not only keeps the pump from leaking oil, but you can stack gaskets to adjust your fuel pressure up and down.

$4.95

$0.75

Fuel Pump Gasket, Upper Fuel Filter - Universal
Fuel Pump Gasket, UpperFuel Filter - Universal

Extra thick fuel pump gasket not only keeps the pump from leaking oil, but you can stack gaskets to adjust your fuel pressure up and down.

Replace your dirty fuel filter and have a couple spares on hand.  They're inexpensive.  Step nipple design fits all common fuel hose sizes.

$0.75

$1.95

Chrome/Glass Reuseable Fuel Filter with Metal Fittings Fuel Tank Strainer & Outlet assembly
Chrome/Glass Reuseable Fuel Filter with Metal FittingsFuel Tank Strainer & Outlet assembly

This quality filter comes with see-through glass and has an element that can be cleaned at every service interval.  It has metal fittings for durability, and looks sharp in any engine bay.

Replacement for your leaky, clogged, or torn fuel tank outlet.

$12.95

$6.95

Cloth Braided Fuel Hose, 5mm, Sold per foot 1/4" Fuel Line - MADE IN USA
Cloth Braided Fuel Hose, 5mm, Sold per foot1/4" Fuel Line - MADE IN USA

Smart VW owners use cloth braided fuel lines in their engine bay and under their fuel tank as VW designed.

1/4" Fuel Line - MADE IN USA

$1.95

$1.75

5/16" Fuel Line - MADE IN USA, used for balance tube 3/8" Fuel Line - MADE IN USA, used for balance tube
5/16" Fuel Line - MADE IN USA, used for balance tube3/8" Fuel Line - MADE IN USA, used for balance tube

5/16" Fuel Line - MADE IN USA

3/8" Fuel Line - MADE IN USA

$2.00

$2.25

#4 Hose Clamp - Stainless MADE IN USA #6 Hose Clamp - Stainless MADE IN USA
#4 Hose Clamp - Stainless MADE IN USA#6 Hose Clamp - Stainless MADE IN USA

Fits fuel lines and up to 5/16" balance tubes.

 

Fits 5/16" to 1/2" fuel hose.  Mostly used for balance tubes between carburetors.

$0.99

$0.99

#10 Hose Clamp - Stainless MADE IN USA #4 Stainless Steel HD Band Type Hose Clamp
#10 Hose Clamp - Stainless MADE IN USA#4 Stainless Steel HD Band Type Hose Clamp

Fits oil breather hoses at valve covers, air cleaners, and breather tube

This old school style banded stainless steel clamp is the best quality clamp we offer for fuel lines up to 5/16" (8mm).  Stainless steel band and stainless screw.  Sold each.  

$1.39

$3.95